New Stainless Steel Brass, L-Rider Mini Lambo 6. A Premium Kit with hard carry case. The New Mini Lambo 6 works at voltages from 3.0 to 6.0 in increments of 0.1v. Uses an 14500 removable battery and has a standard recessed EGO/510 atomiser connection and is supplied with an EFEST 14500 700mah IMR Battery, a stainless EVOD Clearomiser, an EGO USB Charger and a carry case.
Variable Voltage - Mini Lambo 6.0 gives you the power to select the voltage from 3v to 6v in 0.1v increments.
Resistance Checker - You can now check the resistance of your Atomiser.
Regulated voltage output - Mini Lambo 6.0 gives consistent vaping regardless of how much battery power is left.
10-sec switch protection - The Mini Lambo 6.0 has an auto shutdown if the switch is activated for 10 seconds to prevent overheating or damage to the atomizer.
Built in Battery Voltage Meter - The Mini Lambo 6.0 new Blue LCD display shows the voltage of the battery. Will flash when the battery needs recharging, and shutdown.
The 14500 Battery can be charged with an EGO USB charger whilst in the Mini Lambo or you can charge them externally with most multi-chargers.
- Length: 102mm Diameter: 15mm
- Weight: 31g
- FREE SHIPPING as standard.
Starter Kit includes:
- 1 x L-Rider Mini Lambo 6 (Machined Stainless Steel Brass)
- 1x EFEST 14500 700mah IMR Battery
- 1x Stainless EVOD
- 1 x USB Charger
- 1x Carry Case
- LCD Display
- '+'and '-' voltage controls to adjust voltage by 0.1v increments
- On/Off button - Hold "-" for 5 seconds to switch on/off
- Check atomiser resistance by pressing power button 5 times
- Check battery voltage by holding "+" for 5 seconds
- Discharge protection
- Voltage regulator to ensure voltage remains at desired selection
- Short Circuit protection